Comments on: Howto to patch a wireless card to add a connector http://www.larsen-b.com/Article/211.html Titanium Exposé Mon, 02 Jul 2018 13:54:48 +0000 hourly 1 http://wordpress.org/?v=3.5 By: fred http://www.larsen-b.com/Article/211.html/comment-page-1#comment-6840 fred Fri, 14 Nov 2008 21:21:05 +0000 #comment-6840 hi,
Great site!!!!
I soldered the realtec 8187b usb to the antenna element directly no cable to it I used a long 9ft. usb cable.
don’t know the gain and all but realtec wireless signal gain is at 65 to 95 and link is maxxed out at 100,this does vary when in use but it works good for 40 us. I did try the 2 squares and a 4 squares at 31.5. I used a very short piece of copper wire to
connect the element to the card,You have any good ideas for this set up I would like to know! AND thanks for your time on a GREAT site.

C ya!
fred

]]>